home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Power Tools 1993 October - Disc 1
/
Power Tools (Disc 1)(October 1993)(HP).iso
/
spec
/
a3821519
/
a3821519.txt
< prev
Wrap
Text File
|
1992-10-26
|
15KB
|
346 lines
HP PC ARPA and Network Services for MS-DOS, MicroSoft(r) LAN MANAGER,
and NetWare(r) Technical Data
Product Numbers J2246A
HP PC ARPA and Network Services provide a PC running MS-DOS with
HP ARPA Services to host computers in a multivendor environment and
HP Network Services to HP minicomputers. HP PC ARPA and Network Services
run on MicroSoft(r) LAN Manager 2.1 and 2.1a, NetWare(r) ODI and NDIS,
and standalone clients. This product also supports the Windows 3.X
environment in all modes.
Note: The J2246A product combines the following products:
HP Network Services 2.1/MS-DOS (D1811B), HP ARPA Services
2.1/MS-DOS (D1812B), HP Network Services 2.1 for Netware
(D1819A), and HP ARPA Services 2.1 for Netware (D1823A).
For specifics on supported NDIS and ODI card drivers refer to the
Product Requirements section.
HP Network Services provide a PC running MS-DOS with Network File
Transfer (NFT), Terminal Access, and Network Interprocess Communication
(NetIPC) to HP minicomputers. These services supply a complete and
sophisticated set of communication facilities between the PC and the
minicomputer, complementing MicroSoft's(r) LAN Manager and Novell's
NetWare solutions. Also, PROBE is provided for HP 3000 Resource Sharing
connectivity for MicroSoft(r) LAN Manager 2.1 TCP/IP clients.
With HP ARPA Services a PC running MS-DOS can communicate in a
multivendor environment using the networking services defined by the
Department of Defense Advanced Research Project Agency (ARPA) and
Berkeley Software Distribution (BSD) UNIX(r) system.
Features and Benefits of the ARPA Services
o File Transfer (FTP, MIL-STD 1780)
FTP is a family of commands for performing file and directory operations
over the network. You can get or put files to a remote computer, using
either ASCII or binary transfers. File transfers to HP 9000, HP 1000,
HP 3000, Sun, DEC VAX and IBM machines are supported.
o Virtual Terminal (TELNET, MIL-STD 1782)
Teletype Network Protocol (TELNET) lets you use your local PC as a
terminal to another computer on the network. The remote computer can be
running UNIX or another operating system. A public-domain VT100
terminal emulator (Kermit) is included with this TELNET product. TELNET
also supports HP AdvanceLink for DOS, HP AdvanceLink for Windows /
NewWave, and compatible third party terminal emualtors.
o Berkeley Remote Commands (rcp, rsh)
Remote UNIX file copy (rcp) lets you copy files to or from your PC with
a UNIX node over the network. Single files or whole directories can be
copied in this way. Remote shell (rsh) lets you execute a command on a
remote UNIX host.
o Berkeley Sockets Run Time Development Support
Berkeley Sockets run time application support is included. Berkeley
Sockets run time support, using the sockets interface provided with the
HP PC Sockets Developer's Kit (D1827A), allow developers to create a
program running on their PC that can communicate with a peer process
running on another machine on the network. The Sockets Developer's Kit
allows developers to create distributed Sockets applications in either
the DOS or the Windows 3.0 and 3.1 environments.
Note: The D1827A product is orderable by phoning 1-800-848-9283 or
303-353-7650 outside the U.S.
This product only supports development to HP's sockets
interface.
Features and Benefits of Network Services
o Network File Transfer (NFT)
Network File Transfer allows a PC to transfer a file to or from an HP
3000, HP 9000, or HP 1000, or initiate a transfer between any two of
these computers. The NFT operation uses the dscopy command, which can
be issued from the keyboard or from within a program.
o Terminal Access (VT)
Terminal Access provides a PC user with terminal access over the network
to HP 3000s as if the PC were directly connected to the minicomputer.
This terminal access uses HP Advance- Link for DOS, HP AdvanceLink for
Windows / NewWave, and compatible third party terminal emulators.
o Network Interprocess Communication (NetIPC)
The NetIPC application program interface is fully supported by HP NS
Services. With these interfaces, a number of distributed applications
can use the processor power of the PC and the HP 3000, HP 9000, or HP
1000.
Other Features and Benefits
o Supports Industry Standard TCP/IP Transport
Standards allow users to interoperate with other TCP/IP systems.
o Internetting Support
This support allows PC users to access hosts locally on the network as
well as remotely using the TCP/IP transport through routers and
gateways. This allows users to access hosts anywhere in a TCP/IP based
network.
o Microsoft LAN Manager 2.1 and 2.1a support
Both Services run on LM 2.1 clients and also provides HP3000 Resource
Sharing connectivity for Microsoft LAN Manager 2.1 TCP/IP clients. PC
clients can operate on Ethernet, Ethertwist (10BaseT), StarLAN10,
and Token Ring based networks. (Refer to Product Requirements Section
for NDIS drivers and cards supported.)
o Netware 2.15c or later support
Both Services run on Netware clients using NDIS or ODI MAC drivers. All
ODI drivers must be ODINSUP compatible. PC clients can operate on
Ethernet, Ethertwist (10BaseT), and Token Ring based networks. (Refer
to Product Requirements Section for ODI drivers and cards supported.)
o MicroSoft(r) Windows 3.0a and 3.1 and HP NewWave 3.0 and 4.0 Support
Product Requirements
Required Hardware
o A supported PC with 640 Kbytes of memory (plus memory needed for the
terminal emulator or application) from the following list:
- HP Vectra 286/12
- HP Vectra 386/25
- HP Vectra 486/25T
- HP Vectra CS
- HP Vectra ES 12
- HP Vectra QS/16, 16S, 20
- HP Vectra RS/16, 20, 20C, 25C
- Compaq Deskpro 386/S, Model 60
- Compaq Deskpro 386/25, Model 110
- Compaq Deskpro 286, Model 40
- Compaq Portable II
- Compaq Portable III
- IBM AT
- IBM PS/2 (50,50Z,60,70,80)
- IBM PS/2 (25,30)
- IBM PS/2 (30/286)
o One of the following network interface cards to connect to the LAN:
MicroSoft LAN Manager 2.1 and 2.1a Environment
NDIS drivers for cards that are TCP/IP certified are supported. When
NetBEUI is loaded those cards that are certified with LAN Manager over
NetBEUI and MicroSoft TCP/IP are supported.
MS-DOS Standalone or Netware Environment
The follow matrix covers the support of NDIS and ODI drivers for cards
that run in a MS-DOS standalone or Netware environment.
AT Backplane
Interface Standalone Netware Netware
Card NDIS NDIS ODI
HP 27250A ThinLAN hplanb.dos(A.02.05) same hpisaodi.com
v2.00(920629)
HP 27210A/B ThinLAN elnk.dos(1.1) no no
HP 27245A Ethertwist/8 hplanb.dos(A.02.05) same hpisaodi.com
v2.00(920629)
HP 27247A Ethertwist/16 hplanb.dos(A.02.05) same no
HP 27236A StarLAN10 elnk.dos(1.1) same no
HP 27240A StarLAN10 II hplan.dos(A.02.00) same no
HP 27252A PCLAN TL Plus hplanp.dos(A.00.00) same no
HP 27247B PCLAN TP Plus hplanp.dos(A.00.00) same no
3Com 3C501 Etherlink elnk.dos(1.1) no no
3Com 3C503 Etherlink II elnkii.dos same 3C503.com
v1.22(910614)
3Com 3C505 Etherlink elnkpl.dos same no
Plus
Western Digital/SMC smcmac.dos(1.19b) same smcplus.com
EtherCard+ WD8003E v2.11(920406)
NE2000 (Novell or no no ne2000.com
Anthem/Eagle Tech) v1.34(910603)
IBM Token Ring Adaptors ibmtok.dos(1.1) no token.com
(1,2 or 4/16) v1.12(910614)
(no 4/16)
MCA Backplane
Interface Standalone Netware Netware
Card NDIS NDIS ODI
HP 27246A Ethertwist hplan.dos(A.02.00) same no
HP 27241A StarLAN10 hplan.dos(A.02.00) same no
3Com 3C523 EtherLink elnkmc.dos same no
Western Digital/SMC macwd.dos(1.15b) same smcplus.com
Ethercard+/A WD8003ET/A v2.11(920406)
IBM TRN Adaptor/A ibmtok.dos(1.1) no token.com
and 4/16A v1.12(910614)
Note: HP has tested the interface cards listed above. Other Ethernet
or Token Ring cards with NDIS or ODI drivers may or may not work. HP
support is only for the drivers and cards listed above.
Required Software
o DOS version 3.3, 4.01, 5.0
Compatible Software Versions
o NetWare Version 2.15C or later
The Netware clients must have NDIS or ODI MAC drivers. All
ODI drivers must be ODINSUP compatible which means the driver works
with LSL.COM version 1.2 or later.
o HP AdvanceLink for Windows/NewWave (Version A.03.14 or later), HP
AdvanceLink for DOS (Version B.02.21 or later) or compatible third party
product to provide terminal emulation. HP ARPA Services includes a
public domain (Kermit) vt100 terminal emulator.
o Microsoft LAN Manager 2.1 or 2.1a Client
o Microsoft Windows 3.0a or 3.1 version
Other Notes on Software Versions
HP Network Services does not support NFT and VT to a DEC VAX
minicomputer (running Network Services for VAX, HP 50950A).
HP PC ARPA and Network Services is not supported with the following
products:
- HP LAN Manager 1.X
- 3Com 3+Open
- MicroSoft LAN Manager 2.0
- MicroSoft LAN Manager using the DLC transport
Installation and Support
Installation:
HP PC ARPA and Network Services is a customer installable product. The
customer can purchase installation from HP if desired.
Hardware Support Services:
Provides customers with standard hardware support for their HP 1000,
HP 3000, HP 9000, and HP PC hardware.
Software Support Services:
HP Software Materials Update - Entitles the customer to receive updated
software and documentation for any revisions to the product up to, but
not including, the next upgrade.
HP BasicLine Software Support - Provides customer with self-support
through right-to-use updates and access to electronic database.
HP ResponseLine Software Support - Provides all the services of
HP BasicLine Software Support, plus unlimited access to the Response
Center for problem resolution assistance.
HP TeamLine Software Support - Provides all the services of
HP ResponseLine Software Support plus a local account-assigned
HP Service Engineer who will assist the customer with proactive planning
and other support needs.
Network Support Services:
HP WireTest - Verifies the suitability of the customer's existing
twisted-pair cabling for their network. By utilizing sophisticated
tests, which quickly and accurately evaluate existing cabling, the
customer can potentially save a substantial investment that would be
required for rewiring.
Network Planning and Design - Provides customers with a comprehensive
network strategy that supports their business objectives. HP Network
consultants analyze the customer's communication requirements and create
a detailed network design based on these requirements.
Network Startup - Provides customers with quick implementation of their
network, a simplified service interface, verified network operation, and
assured on-going supportability. Please refer to the HP Network Startup
data sheet for more information.
NetAssure - Provides customers with fault isolation and assistance with
problem resolution anywhere on their network. Please refer to the
HP NetAssure data sheet for more information.
HP PCLAN - Provides Novell customers with a single source
of support for NetWare and HP PC-based local area networks and personal
computers and peripherals attached to the network.
Ordering Information
J2246A HP PC ARPA and Network Services for MS-DOS, MicroSoft LAN
Manager and Netware
(Must order at least one option)
(Must order option 001 or 006 for 1 set manuals and software)
Options:
001 1 user license with manuals and software
002 RTC for 8 additional users
003 RTC for 32 additional users
004 RTC for 128 additional users
005 RTC for 512 additional users
006 Upgrade from NS 2.1 (D1811B,D1819A) or ARPA 2.1 (D1812B,D1823A)
or NS LAN GW (D1807A); 1 user license with software and manuals
007 Upgrade from NS 2.1 (D1811B,D1819A) or ARPA 2.1 (D1812B,D1823A)
or NS LAN GW (D1807A); RTC for additional 1 user
008 Upgrade from NS 2.1 (D1811B,D1819A) or ARPA 2.1 (D1812B,D1823A)
or NS LAN GW (D1807A); RTC for additional 8 users
009 Upgrade from NS 2.1 (D1811B,D1819A) or ARPA 2.1 (D1812B,D1823A)
or NS LAN GW (D1807A); RTC for additional 32 users
010 Upgrade from NS 2.1 (D1811B,D1819A) or ARPA 2.1 (D1812B,D1823A)
or NS LAN GW (D1807A); RTC for additional 128 users
011 Upgrade from NS 2.1 (D1811B,D1819A) or ARPA 2.1 (D1812B,D1823A)
or NS LAN GW (D1807A); RTC for additional 512 users
012 Additional user manual
HP Commercial PC Software Support Services
H2015A+H00 HP Response Line
H2016A+S00 Software Material Update Service
Documentation
HP PC ARPA and Network Services includes:
J2246-90000 Installation Guide
J2246-90001 Error Messages and Troubleshooting Guide
J2246-90002 ARPA User Guide
J2246-90003 Network Services User Guide
Related Products
B1003A HP LAN Manager/X for the HP 9000 Series 300
B1011A HP LAN Manager/X for the HP 9000 Series 800
D1811B HP Network Services 2.1/MS-DOS
D1812B HP ARPA Services 2.1/MS-DOS
D1819A HP Network Services 2.1 for NetWare
D1923A HP ARPA Services 2.1 for NetWare
D1827A opt. 001 HP PC Sockets Developer's Kit 1.0
68333F HP AdvanceLink for DOS
D2104B HP AdvanceLink for Windows/HP NewWave
Various HP NewWave Offices
Microsoft(r) is a U.S. registered trademark of Microsoft Corporation.
MS-DOS(r) is a U.S. registered trademark of Microsoft Corporation.
UNIX(r) is a registered trademark of UNIX System Laboratories Inc. in
the U.S.A. and other countries.
Novell(r) and NetWare(r) are U.S. registered trademarks of Novell
Corporation.
HP PC ARPA and Network Services for MS-DOS, MicroSoft(r) LAN Manager
and NetWare(r) Technical Data
From the Networking Specifications Guide, 9210, no page number, no
publication number
Associated files: J2246A.doc, J2246.pcl
HP PC ARPA and Network Services for MS-DOS, MicroSoft(r) LAN MANAGER,
and NetWare(r) Technical Data